Motion X500 | Surround Sound Bluetooth Speaker
$169.99

Join our Registry, and create your own wish list for gifts now!

Motion X500 | Surround Sound Bluetooth Speaker

FAQ

  • What's in the box?
    Motion X500 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included
  • What's the playtime of Motion X500?
    Motion X500 supports up to 12 hours of playtime.

    Note: The 12-hour battery life is based on measurements taken at 50% volume and with
    BassUpturned off. The actual battery life may vary depending on factors such as the type
    of content being played, custom EQ settings, and volume level.
  • Can Motion X500 pair with other speakers, such as the Motion+ / Motion X600 speaker?
    No, it cannot pair with the Motion+ / Motion X600 or other model speakers. However, the
    Motion X500 can pair with another Motion X500 speaker via TWS.
  • Can I get stereo sound when using one Motion X500?
    Yes. The left side plays left channel, and the right side plays right channel.
  • Does Motion X500 have a microphone?
    Yes.
  • Does Motion X500 support USB playback?
    No.
  • Can I deactivate the power on/off and Bluetooth connection sounds?
    Yes, you can deactivate the power on/off and Bluetooth connection sounds. Just connect
    X500 to the soundcore app, and turnoff these sounds in the X500's setup interface.
  • Is Motion X500 waterproof?
    Motion X500 is IPX7 waterproof,but before submerging it in water, it is necessary to
    ensure that the waterproof cover on the back is securely fastened.
  • How long does it take to charge Motion X500?
    It takes around 5 hours to charge with a certified 5V/3A (15W) wall charger.
  • How do I reset Motion X500?
    Turn on the speaker then hold down the Bluetooth and Volume + buttons for 5-10 seconds.
    You'll hear a prompt, and the speaker will automatically restart.
  • What is the output power of Motion X500?
    40W.
  • What Bluetooth version does Motion X500 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion X500 support?
    Motion X500 supports LDAC, SBC, MPEG2, and AAC Bluetooth codecs.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the
    ordinary SBC Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above, it does not work
    on iPhone.
  • How do I use LDAC?
    On a device running Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to Settings.
    3. Click on Sound Mode.
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    It takes about 10 seconds to switch audio codecs. You may be required to update the
    speaker's firmware if available. Do not use the app or speaker while updating.

    • LDAC provides higher quality sound but increases power consumption and reduces
    playtime.
    Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • What is TWS and does Motion X500 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo
    sound after pairing up. Motion X500 supports TWS.
  • How can I pair two Motion X500 speakers at the same time with TWS?
    Method 1
    1. Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired
    successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2
    1. Long press the power button to start both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter
    TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired
    successfully.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X500 speakers paired at the same time, the master speaker
    supports left channel and sky channel (if spatial audio is turned on), while the secondary
    speaker supports right channel and sky channel (if spatial audio is turned on).
  • How can I connect Motion X500 to my laptop?
    MacBook:
    1. Turn on Bluetooth and find soundcore Motion X500 in the list of available devices.
    2. Connect soundcore Motion X500 to your MacBook.
    3. Open "Sound" and confirm that soundcore Motion X500 is the default for all sound. If it
    is not the default, change the settings.

    Windows Laptops:
    1. Turn on Bluetooth and find soundcore Motion X500' in the list of available devices.
    2. Connect soundcore Motion X500 to your laptop.
    3. Open ''Sound'' and confirm that soundcore Motion X500 is the default for all sound.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior
    sound quality that retains more audio detail.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience.
    Simply press the Spatial Audio button to turn on.
  • Does spatial audio require a specific music format?
    No.
  • What is the function of the light at the top of Motion X500?
    The light at the top of the Motion X500 is called the Sky Light. It lights up while you're
    listening to music via the sky channel upward-facing speaker on the top of Motion X500.
  • Can I change the color of the light on the top of Motion X500?
    Yes, you can customize the color of the Sky Light through the soundcore app.

    The following are the default skylight colors (Note: Light color can be customized in the
    App),You can directly access different EQs through the EQ Switch Button.

    White Light: Spatial Signature EQ
    Cold White Light: Spatial Dynamic EQ
    Warm White Light: Bass Boost EQ
  • Manual

    A3131 - manual

    2023-11-9

  • QSG

    A3131 - QSG

    2023-11-9

    • What's in the box?
      Motion X500 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included
    • What's the playtime of Motion X500?
      Motion X500 supports up to 12 hours of playtime. Note: The 12-hour battery life is based on measurements taken at 50% volume and with BassUpturned off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Can Motion X500 pair with other speakers, such as the Motion+ / Motion X600 speaker?
      No, it cannot pair with the Motion+ / Motion X600 or other model speakers. However, the Motion X500 can pair with another Motion X500 speaker via TWS.
    • Can I get stereo sound when using one Motion X500?
      Yes. The left side plays left channel, and the right side plays right channel.
    • Does Motion X500 have a microphone?
      Yes.
    • Does Motion X500 support USB playback?
      No.
    • Can I deactivate the power on/off and Bluetooth connection sounds?
      Yes, you can deactivate the power on/off and Bluetooth connection sounds. Just connect X500 to the soundcore app, and turnoff these sounds in the X500's setup interface.
    • Is Motion X500 waterproof?
      Motion X500 is IPX7 waterproof,but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • How long does it take to charge Motion X500?
      It takes around 5 hours to charge with a certified 5V/3A (15W) wall charger.
    • How do I reset Motion X500?
      Turn on the speaker then hold down the Bluetooth and Volume + buttons for 5-10 seconds. You'll hear a prompt, and the speaker will automatically restart.
    • What is the output power of Motion X500?
      40W.
    • What Bluetooth version does Motion X500 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion X500 support?
      Motion X500 supports LDAC, SBC, MPEG2, and AAC Bluetooth codecs.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above, it does not work on iPhone.
    • How do I use LDAC?
      On a device running Android 8.0 or above, do the following: 1. Open the soundcore app. 2. Go to Settings. 3. Click on Sound Mode. 4. Select Preferred Audio Quality and switch to LDAC codec. Notes: It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating. • LDAC provides higher quality sound but increases power consumption and reduces playtime. Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • What is TWS and does Motion X500 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion X500 supports TWS.
    • How can I pair two Motion X500 speakers at the same time with TWS?
      Method 1 1. Long press the power button to start both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The master speaker is the one with the blue light. 6. Use the master speaker to pair with your device. Method 2 1. Long press the power button to start both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X500 speakers paired at the same time, the master speaker supports left channel and sky channel (if spatial audio is turned on), while the secondary speaker supports right channel and sky channel (if spatial audio is turned on).
    • How can I connect Motion X500 to my laptop?
      MacBook: 1. Turn on Bluetooth and find soundcore Motion X500 in the list of available devices. 2. Connect soundcore Motion X500 to your MacBook. 3. Open "Sound" and confirm that soundcore Motion X500 is the default for all sound. If it is not the default, change the settings. Windows Laptops: 1. Turn on Bluetooth and find soundcore Motion X500' in the list of available devices. 2. Connect soundcore Motion X500 to your laptop. 3. Open ''Sound'' and confirm that soundcore Motion X500 is the default for all sound.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • Does spatial audio require a specific music format?
      No.
    • What is the function of the light at the top of Motion X500?
      The light at the top of the Motion X500 is called the Sky Light. It lights up while you're listening to music via the sky channel upward-facing speaker on the top of Motion X500.
    • Can I change the color of the light on the top of Motion X500?
      Yes, you can customize the color of the Sky Light through the soundcore app. The following are the default skylight colors (Note: Light color can be customized in the App),You can directly access different EQs through the EQ Switch Button. White Light: Spatial Signature EQ Cold White Light: Spatial Dynamic EQ Warm White Light: Bass Boost EQ
    • Manual

      A3131 - manual

      2023-11-9

    • QSG

      A3131 - QSG

      2023-11-9

  • What's in the box?
    Motion X500 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included
  • What's the playtime of Motion X500?
    Motion X500 supports up to 12 hours of playtime.

    Note: The 12-hour battery life is based on measurements taken at 50% volume and with
    BassUpturned off. The actual battery life may vary depending on factors such as the type
    of content being played, custom EQ settings, and volume level.
  • Can Motion X500 pair with other speakers, such as the Motion+ / Motion X600 speaker?
    No, it cannot pair with the Motion+ / Motion X600 or other model speakers. However, the
    Motion X500 can pair with another Motion X500 speaker via TWS.
  • Can I get stereo sound when using one Motion X500?
    Yes. The left side plays left channel, and the right side plays right channel.
  • Does Motion X500 have a microphone?
    Yes.
  • Does Motion X500 support USB playback?
    No.
  • Can I deactivate the power on/off and Bluetooth connection sounds?
    Yes, you can deactivate the power on/off and Bluetooth connection sounds. Just connect
    X500 to the soundcore app, and turnoff these sounds in the X500's setup interface.
  • Is Motion X500 waterproof?
    Motion X500 is IPX7 waterproof,but before submerging it in water, it is necessary to
    ensure that the waterproof cover on the back is securely fastened.
  • How long does it take to charge Motion X500?
    It takes around 5 hours to charge with a certified 5V/3A (15W) wall charger.
  • How do I reset Motion X500?
    Turn on the speaker then hold down the Bluetooth and Volume + buttons for 5-10 seconds.
    You'll hear a prompt, and the speaker will automatically restart.
  • What is the output power of Motion X500?
    40W.
  • What Bluetooth version does Motion X500 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion X500 support?
    Motion X500 supports LDAC, SBC, MPEG2, and AAC Bluetooth codecs.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the
    ordinary SBC Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above, it does not work
    on iPhone.
  • How do I use LDAC?
    On a device running Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to Settings.
    3. Click on Sound Mode.
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    It takes about 10 seconds to switch audio codecs. You may be required to update the
    speaker's firmware if available. Do not use the app or speaker while updating.

    • LDAC provides higher quality sound but increases power consumption and reduces
    playtime.
    Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • What is TWS and does Motion X500 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo
    sound after pairing up. Motion X500 supports TWS.
  • How can I pair two Motion X500 speakers at the same time with TWS?
    Method 1
    1. Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired
    successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2
    1. Long press the power button to start both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter
    TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired
    successfully.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X500 speakers paired at the same time, the master speaker
    supports left channel and sky channel (if spatial audio is turned on), while the secondary
    speaker supports right channel and sky channel (if spatial audio is turned on).
  • How can I connect Motion X500 to my laptop?
    MacBook:
    1. Turn on Bluetooth and find soundcore Motion X500 in the list of available devices.
    2. Connect soundcore Motion X500 to your MacBook.
    3. Open "Sound" and confirm that soundcore Motion X500 is the default for all sound. If it
    is not the default, change the settings.

    Windows Laptops:
    1. Turn on Bluetooth and find soundcore Motion X500' in the list of available devices.
    2. Connect soundcore Motion X500 to your laptop.
    3. Open ''Sound'' and confirm that soundcore Motion X500 is the default for all sound.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior
    sound quality that retains more audio detail.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience.
    Simply press the Spatial Audio button to turn on.
  • Does spatial audio require a specific music format?
    No.
  • What is the function of the light at the top of Motion X500?
    The light at the top of the Motion X500 is called the Sky Light. It lights up while you're
    listening to music via the sky channel upward-facing speaker on the top of Motion X500.
  • Can I change the color of the light on the top of Motion X500?
    Yes, you can customize the color of the Sky Light through the soundcore app.

    The following are the default skylight colors (Note: Light color can be customized in the
    App),You can directly access different EQs through the EQ Switch Button.

    White Light: Spatial Signature EQ
    Cold White Light: Spatial Dynamic EQ
    Warm White Light: Bass Boost EQ
  • Manual

    A3131 - manual

    2023-11-9

  • QSG

    A3131 - QSG

    2023-11-9

    • What's in the box?
      Motion X500 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included
    • What's the playtime of Motion X500?
      Motion X500 supports up to 12 hours of playtime. Note: The 12-hour battery life is based on measurements taken at 50% volume and with BassUpturned off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Can Motion X500 pair with other speakers, such as the Motion+ / Motion X600 speaker?
      No, it cannot pair with the Motion+ / Motion X600 or other model speakers. However, the Motion X500 can pair with another Motion X500 speaker via TWS.
    • Can I get stereo sound when using one Motion X500?
      Yes. The left side plays left channel, and the right side plays right channel.
    • Does Motion X500 have a microphone?
      Yes.
    • Does Motion X500 support USB playback?
      No.
    • Can I deactivate the power on/off and Bluetooth connection sounds?
      Yes, you can deactivate the power on/off and Bluetooth connection sounds. Just connect X500 to the soundcore app, and turnoff these sounds in the X500's setup interface.
    • Is Motion X500 waterproof?
      Motion X500 is IPX7 waterproof,but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • How long does it take to charge Motion X500?
      It takes around 5 hours to charge with a certified 5V/3A (15W) wall charger.
    • How do I reset Motion X500?
      Turn on the speaker then hold down the Bluetooth and Volume + buttons for 5-10 seconds. You'll hear a prompt, and the speaker will automatically restart.
    • What is the output power of Motion X500?
      40W.
    • What Bluetooth version does Motion X500 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion X500 support?
      Motion X500 supports LDAC, SBC, MPEG2, and AAC Bluetooth codecs.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above, it does not work on iPhone.
    • How do I use LDAC?
      On a device running Android 8.0 or above, do the following: 1. Open the soundcore app. 2. Go to Settings. 3. Click on Sound Mode. 4. Select Preferred Audio Quality and switch to LDAC codec. Notes: It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating. • LDAC provides higher quality sound but increases power consumption and reduces playtime. Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • What is TWS and does Motion X500 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion X500 supports TWS.
    • How can I pair two Motion X500 speakers at the same time with TWS?
      Method 1 1. Long press the power button to start both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The master speaker is the one with the blue light. 6. Use the master speaker to pair with your device. Method 2 1. Long press the power button to start both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X500 speakers paired at the same time, the master speaker supports left channel and sky channel (if spatial audio is turned on), while the secondary speaker supports right channel and sky channel (if spatial audio is turned on).
    • How can I connect Motion X500 to my laptop?
      MacBook: 1. Turn on Bluetooth and find soundcore Motion X500 in the list of available devices. 2. Connect soundcore Motion X500 to your MacBook. 3. Open "Sound" and confirm that soundcore Motion X500 is the default for all sound. If it is not the default, change the settings. Windows Laptops: 1. Turn on Bluetooth and find soundcore Motion X500' in the list of available devices. 2. Connect soundcore Motion X500 to your laptop. 3. Open ''Sound'' and confirm that soundcore Motion X500 is the default for all sound.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • Does spatial audio require a specific music format?
      No.
    • What is the function of the light at the top of Motion X500?
      The light at the top of the Motion X500 is called the Sky Light. It lights up while you're listening to music via the sky channel upward-facing speaker on the top of Motion X500.
    • Can I change the color of the light on the top of Motion X500?
      Yes, you can customize the color of the Sky Light through the soundcore app. The following are the default skylight colors (Note: Light color can be customized in the App),You can directly access different EQs through the EQ Switch Button. White Light: Spatial Signature EQ Cold White Light: Spatial Dynamic EQ Warm White Light: Bass Boost EQ
    • Manual

      A3131 - manual

      2023-11-9

    • QSG

      A3131 - QSG

      2023-11-9

Customer Reviews

Based on 11 reviews
73%
(8)
9%
(1)
0%
(0)
0%
(0)
18%
(2)
L
Lainey

I bought these in February 2023 less then a year later one earbud no longer works. I’m guessing the case wore out because it will connect but turn off immediately after. Anker is my preferred brand and generally has been great so this is a letdown.

n
nope213

She uses these everyday.

V
Vanessa rodriguez

The fit and bass are good and I like the quick Bluetooth connectivity.

B
Brian martinez

I got the first pair got a totally different pair that I ordered. Sent them back and got the right one and only one would charge totally not worth the $100 dollars I spent i went and bought a new pair of Sony for the same price

e
eugene legeza

Good quality

You may also like